BREAKINGUSDJPY and XAUUSD react as US carrier arrives in Middle East amid Iran tensions

How to calculate position size in forex: the lot size for every trade

Your position size decides how much a losing trade really costs. Here is the simple formula, worked examples on EUR/USD, USD/JPY and EUR/GBP, and a checklist so every trade risks only what you planned.

EURO VS US DOLLAREUR/USDUSD/JPYEUR/GBPFXROLL
60-second read
  • Position size is worked out from three things you choose before the trade, your account balance, the share of it you are willing to lose, and the distance to your stop-loss.
  • The formula is money at risk divided by stop distance in pips, divided by the pip value of one lot.
  • A wider stop means a smaller position for the same money at risk, so the loss stays the same either way.
  • Pip value is not always 10 dollars per standard lot, so pairs like USD/JPY and EUR/GBP need one extra conversion step.
  • Leverage does not change the right position size; it only decides whether you have enough margin to open it.

Two traders can take the same trade, with the same entry and the same stop-loss, and end up with very different results. The difference is position size: how many lots each of them opened. Learning how to calculate position size is the single habit that turns a stop-loss from a hopeful line on a chart into a known, fixed amount of money.

Many blown accounts come from a reasonable idea placed with a position far too big for the account. The maths to avoid that takes under a minute.

What is position size in forex?

Position size is the amount of currency you buy or sell, usually measured in lots. A standard lot is 100,000 units of the base currency, a mini lot is 10,000 and a micro lot is 1,000. Most platforms let you type sizes like 0.25 or 0.07 lots, so you can fine-tune the size to your plan.

The key idea is that you do not choose the lot size first. You choose how much you are willing to lose, decide where the stop-loss goes based on the chart, and let the lot size fall out of those two decisions.

The position size formula

There are only three inputs:

  • Money at risk. Your balance multiplied by the share of it you are willing to lose on this trade. Many traders keep this to a small fixed fraction, often around 1% or less, so a run of losses does not do lasting damage.
  • Stop distance in pips. The gap between your entry price and your stop-loss.
  • Pip value per lot. How much one pip is worth on one standard lot of that pair, in your account currency.

Then:

Position size in lots = money at risk ÷ stop distance in pips ÷ pip value per standard lot

Working out your lot size

  1. 1
    Write down your account balance in your account currency.
  2. 2
    Multiply it by the share you are willing to risk to get money at risk.
  3. 3
    Place your stop-loss where the chart says your idea is wrong, and measure the distance in pips.
  4. 4
    Divide money at risk by the stop distance to get the money you can risk per pip.
  5. 5
    Divide that by the pip value of one standard lot to get your lot size.
  6. 6
    Round down to the nearest size your broker allows, then check you have enough free margin.

Worked example: EUR/USD with a 5,000-dollar account

All numbers here are round and illustrative. Say you have a 5,000-dollar account and you decide to risk 1% on a trade. Your money at risk is 50 dollars.

On EUR/USD, and on any pair where the US dollar is the second currency, one pip on a standard lot is worth 10 dollars. That makes it the easiest case.

If your stop-loss is 25 pips away, you can risk 50 ÷ 25 = 2 dollars per pip. Divide by 10 dollars per lot and you get 0.20 lots.

Keep the same 50 dollars at risk and change only the stop: a 20-pip stop gives 0.25 lots, a 50-pip stop gives 0.10 lots and a 100-pip stop gives 0.05 lots.

Example

Lot size for a 50-dollar risk on EUR/USD

Illustrative numbers to show how it works, not live prices or a forecast.

In every line, a stopped-out trade loses about 50 dollars before costs. A wide stop is not more dangerous than a tight one, as long as the position is smaller to match.

What if the pip value is not 10 dollars?

Pip value changes when the US dollar is not the second currency in the pair, so you need one extra step.

USD/JPY. One pip is 0.01 yen, so a standard lot moves 1,000 yen per pip. To turn that into dollars, divide by the exchange rate. Say USD/JPY is at 150.00: 1,000 ÷ 150 is about 6.67 dollars per pip. With 50 dollars at risk and a 30-pip stop, you can risk about 1.67 dollars per pip, and 1.67 ÷ 6.67 gives 0.25 lots.

EUR/GBP. Here a pip on a standard lot is worth 10 pounds. Say GBP/USD is at 1.2500, so 10 pounds is 12.50 dollars. With 50 dollars at risk and a 40-pip stop, you can risk 1.25 dollars per pip, and 1.25 ÷ 12.50 gives 0.10 lots.

Because these pip values move with the exchange rate, check them on the day you trade. The pip value calculator shows the current figure for your account currency, and the position size calculator runs the whole formula for you.

Gold, silver, oil and indices follow the same logic, but contract sizes and price steps vary by broker, so read your broker's contract specifications before applying the formula to them.

Does leverage change position size?

No. Leverage decides how much margin your broker holds, not how much you lose if the stop is hit. A 0.20-lot EUR/USD trade with a 25-pip stop loses about 50 dollars at any leverage.

Where leverage matters is the final check. If your account does not have enough free margin for the position the formula gives you, the trade cannot be opened, or it leaves too little room before a margin call. The glossary explains margin calls and stop-outs if you want that side in more detail.

How much should I risk per trade?

There is no single right figure. What matters is that it is small, fixed in advance and the same from trade to trade, so one emotional day cannot undo weeks of work. If you trade a prop firm challenge, work out your risk from the room left before the daily loss limit and maximum drawdown, not from the headline account size. You can compare rules on our prop firms page.

Common position sizing mistakes

  • Picking the lot size first. Then moving the stop to fit it. The stop should come from the chart, the size from the maths.
  • Assuming every pair is 10 dollars a pip. On yen pairs and crosses this can make a position noticeably too big or too small.
  • Stacking similar trades. Three trades on pairs that move together can add up to three times the risk you meant to take.
  • Rounding up. If the answer falls between two sizes, take the smaller one.

In practice

  • Decide your risk per trade before you look at any chart, and write it down.
  • Place the stop where your idea is proven wrong, then measure it in pips.
  • Use the formula, or the position size calculator, for every single trade.
  • Check pip value on yen pairs, crosses and anything that is not quoted in your account currency.
  • Confirm you have enough free margin, and remember that spreads, commission and slippage add a little to any loss.
  • Keep a note of planned risk against actual loss in your trading journal, so you can spot sizing errors early.

Trading forex on margin carries a high level of risk. Position sizing does not make a strategy profitable, but it makes sure that being wrong costs only what you agreed to beforehand.

Risk warning: Trading foreign exchange and CFDs on margin carries a high level of risk and may not be suitable for all investors. Leverage can work against you. Content on FXROLL is for information and education only and is not investment advice. Prices and data may be delayed or contain errors.

Keep reading

More blog →