New: The Daily Roll, forex in 60 seconds →

RSI indicator in forex: what overbought and oversold really mean

The RSI is one of the most popular indicators on forex charts, and one of the most misread. Learn how it is worked out, what the 70 and 30 lines really tell you, how divergence works and the mistakes that cost beginners money.

TECHNICAL ANALYSISMARKETSFXROLL
60-second read
  • The RSI compares the size of recent up moves with recent down moves and turns the result into a number from 0 to 100.
  • Above 70 is called overbought and below 30 oversold, but in a strong trend the RSI can stay there for a long time.
  • Overbought does not mean "about to fall". It means price has risen fast, which is often a sign of strength.
  • Divergence, where price and RSI disagree, is a warning that momentum is fading, not a timing signal on its own.
  • Use the RSI with the trend and your own levels, and size every trade for your stop.

Most traders add the RSI to a chart early on, and many lose money on it soon after. The RSI indicator in forex is not the problem. The problem is reading "overbought" as "sell now" and "oversold" as "buy now", which is not what the numbers say.

Used properly, the RSI is a simple way to measure how strong a move has been. This guide explains how it is calculated, what the familiar 70 and 30 lines really mean, how divergence works, and the habits that keep the indicator useful rather than dangerous.

What is the RSI indicator

RSI stands for Relative Strength Index. It was created by J. Welles Wilder and published in his 1978 book on technical trading systems. It is a momentum oscillator, which means it moves between fixed limits (0 and 100) and tells you about the speed of price changes, not the price itself.

Over a set number of candles, the RSI compares how much price rose on the up candles and how much it fell on the down candles. If the gains have been much bigger than the losses, the RSI is high. If the losses have dominated, it is low. Around 50 means the two have been roughly balanced.

The standard setting is 14 periods, which is the default in MT4, MT5 and TradingView. On a daily chart that is the last 14 days. On a one-hour chart it is the last 14 hours.

How RSI is calculated

Your platform does the sum, but seeing it once helps.

  1. Find the average gain over the last 14 candles (the up moves only).
  2. Find the average loss over the same 14 candles (the down moves only, as a positive number).
  3. Divide the average gain by the average loss. This is called RS, the relative strength.
  4. Put it into the formula: RSI = 100 minus (100 divided by (1 + RS)).

Wilder used a smoothed average, so after the first value each new reading blends the latest candle with the previous averages. That is why the RSI moves steadily rather than jumping around with every candle.

Worked example: an RSI reading of 75

Take an illustrative GBP/USD chart, with made-up numbers. Over the last 14 candles, the average gain on up candles works out at 30 pips and the average loss on down candles at 10 pips.

RS is 30 divided by 10, which is 3. One plus RS is 4. One hundred divided by 4 is 25. Take that from 100 and the RSI is 75.

That is above 70, so most charts would call it overbought. All it tells you is that recent up moves have been about three times the size of recent down moves. It does not say the rise is over.

Now suppose the next few candles are quieter and the average gain eases to 20 pips while the average loss stays at 10. RS drops to 2, and the RSI falls to about 67. Price may still be climbing, but the climb has slowed. That change in pace is what the RSI is really measuring.

Example

What drives the RSI from 75 to 67

Illustrative numbers to show how it works, not live prices or a forecast.

What overbought and oversold really mean

By convention, a reading above 70 is called overbought and below 30 oversold. These words cause most of the trouble.

Overbought sounds like a warning that price is too high and must come down. It is not. It means price has risen quickly compared with its recent falls. In a strong uptrend, the RSI can sit above 70 for days or weeks while price keeps rising. A trader who sells every time it crosses 70 ends up fighting the trend again and again.

The same applies in a sharp sell-off, or around big news on the economic calendar: the RSI can stay below 30 while price keeps dropping.

Where overbought and oversold readings are more useful is in a sideways market. When a pair is bouncing between clear support and resistance, an RSI near 70 at the top of the range or near 30 at the bottom can back up what the levels already show. If you are new to finding those levels, our guide to support and resistance is a good place to start, and the glossary covers the terms.

In a trend, many traders flip the idea around. Instead of looking for extremes to trade against, they use the RSI to judge whether the trend still has strength.

In an uptrend, the RSI often holds above roughly 40 to 50 on pullbacks. A dip in price that sends the RSI back towards that zone, then sees it turn up again, can show buyers stepping back in. In a downtrend the mirror applies, with the RSI often failing to rise much above 50 to 60 on bounces.

These zones are rough guides that vary by pair and timeframe, so check your own chart first.

What is RSI divergence

Divergence is when price and the RSI tell different stories.

  • Bearish divergence: price makes a higher high, but the RSI makes a lower high. The new high came with less momentum than the last one.
  • Bullish divergence: price makes a lower low, but the RSI makes a higher low. Sellers pushed price lower with less force.

Divergence is a sign that a move is tiring. It is not a signal that the move has ended. Trends can show divergence several times before they turn, and some never turn at all in a way you can trade. Treat it as a reason to tighten your focus, take some profit or wait for price to confirm with a break of a level, rather than as an entry on its own.

Best RSI settings for forex

There is no best setting, only trade-offs. A shorter period, such as 7 or 9, makes the RSI faster and more jumpy, with more readings above 70 and below 30. A longer one, such as 21, makes it smoother and slower, with fewer extremes.

Some traders move the lines to 80 and 20 so only the strongest moves stand out. Whatever you pick, test it on past charts and keep it in your trading plan.

Checking an RSI reading before a trade

  1. 1
    Look at the higher timeframe and decide whether the pair is trending or ranging.
  2. 2
    Mark the main support and resistance levels on your trading chart.
  3. 3
    Read the RSI in that context: strength in a trend, extremes in a range.
  4. 4
    Look for divergence near your levels as a warning, not as the trigger.
  5. 5
    Set your stop where the idea is proven wrong, then size the trade with the position size calculator.

In practice

  • Read the RSI as a measure of momentum, not a price forecast.
  • Use overbought and oversold mainly in ranges, near levels you have already marked.
  • Keep your settings fixed and tested.
  • Always set a stop and keep the risk on each trade small. Indicators can be wrong, and leveraged trading can lose more than you expect.

Risk warning: Trading foreign exchange and CFDs on margin carries a high level of risk and may not be suitable for all investors. Leverage can work against you. Content on FXROLL is for information and education only and is not investment advice. Prices and data may be delayed or contain errors.

Keep reading

More blog →