BREAKINGUSDJPY and XAUUSD react as US carrier arrives in Middle East amid Iran tensions

Pips, lots and leverage explained with one trade

Pips measure the move, lots set how much each pip is worth, and leverage decides how much margin you put up. Follow one illustrative EUR/USD trade to see how the three fit together, and why leverage is not what sets your risk.

EURO VS US DOLLAREUR/USDFXROLL
60-second read
  • A pip is the standard unit of price movement, usually the fourth decimal place, or the second for yen pairs.
  • Lot size decides how much money each pip is worth; for a USD-quoted pair a standard lot is roughly 10 dollars a pip.
  • Leverage changes how much margin a trade ties up, not how much you win or lose per pip.
  • Your real risk comes from lot size multiplied by the distance to your stop, so size the trade from the stop, not from the leverage on offer.

Pips, lots and leverage are the first three words most new forex traders meet, and they are often explained separately, as if they had nothing to do with each other. In practice they are three parts of one sum. Get that sum wrong and a trade that looks small on the chart can take a painful bite out of your account.

The good news is that the arithmetic is simple. Once you have followed it through a single trade, every platform screen, broker spec sheet and position-size calculator starts to make sense. So let us do exactly that.

What a pip is

A pip is the standard unit for measuring how far a currency price has moved. For most pairs it is the fourth decimal place. If EUR/USD goes from 1.1000 to 1.1001, it has moved one pip. From 1.1000 to 1.1050 is fifty pips.

Pairs that involve the Japanese yen are the main exception. They are quoted with fewer decimals, so a pip is the second decimal place. If USD/JPY moves from 150.00 to 150.01, that is one pip.

Many brokers now show an extra digit, so you will see prices such as 1.10005. That last digit is a fraction of a pip, often called a pipette or point. It is useful for showing tight spreads, but when people talk about a "30-pip stop" they still mean the fourth decimal place.

On its own, a pip tells you nothing about money. Fifty pips could be a few cents or several hundred dollars. That depends on the next ingredient.

What a lot is

A lot is a standard trade size, measured in units of the first currency in the pair (the base currency). The three common sizes are:

  • Standard lot: 100,000 units, shown on most platforms as 1.00.
  • Mini lot: 10,000 units, shown as 0.10.
  • Micro lot: 1,000 units, shown as 0.01.

For any pair where the US dollar is the second currency (EUR/USD, GBP/USD, AUD/USD and so on), the pip value is easy to work out. One pip is 0.0001, so on a standard lot of 100,000 units one pip is worth 100,000 × 0.0001 = 10 dollars. A mini lot is about 1 dollar a pip and a micro lot about 10 cents.

For other pairs the pip value is first worked out in the second currency and then converted into your account currency, so it shifts slightly as prices change. You do not need to do that by hand: the pip value calculator does it for any pair and account currency.

What leverage is

Leverage lets you control a position that is larger than the money you put up for it. That money is called margin. With leverage of 1:30, every 1 dollar of margin controls up to 30 dollars of position. With 1:100, it is 1 to 100.

The key point, and the one most often misunderstood, is this: leverage decides how much margin a trade ties up. It does not decide how much each pip is worth. That is set entirely by your lot size.

Maximum leverage varies a great deal by regulator, by account type and by the instrument you trade. Some regulators cap it quite tightly for retail clients, while some offshore brokers offer far higher figures. Check what applies to your own account, and treat a very high leverage offer as a warning sign rather than a feature. Our broker directory lists who regulates each firm.

One trade, step by step

Let us put the three together. All the numbers below are illustrative, chosen to keep the maths round.

Say you have an account of 2,000 dollars. EUR/USD is at 1.1000 and you decide to buy one mini lot, which is 10,000 euros.

Position size. 10,000 euros at 1.1000 is worth 11,000 dollars. That is the full value of the position you now control, even though your account is only 2,000 dollars.

Margin. If your account has 1:30 leverage, the broker sets aside 11,000 ÷ 30, roughly 367 dollars, as margin. If it had 1:100, the margin would be 110 dollars. Either way, the rest of your balance stays free to absorb losses.

Pip value. One mini lot of EUR/USD is worth about 1 dollar per pip. This is the same at 1:30 and at 1:100.

If the trade goes your way. EUR/USD rises to 1.1040, a move of 40 pips. You make 40 × 1 dollar = 40 dollars, before costs.

If it goes against you. EUR/USD falls to 1.0960, also 40 pips. You lose 40 dollars, plus costs such as the spread.

With a stop-loss. Suppose you place a stop 30 pips below your entry, at 1.0970. If it is hit, the loss is about 30 dollars, which is 1.5% of your 2,000-dollar account. That 1.5% is your real risk on this trade.

Notice what did and did not change when we switched from 1:30 to 1:100. The margin changed. The profit, the loss and the risk per pip did not.

Where leverage really bites

If leverage does not change the pip value, why does it have such a fearsome reputation? Because high leverage lets you open much bigger positions with the same account.

Go back to the 2,000-dollar account. At 1:30, the largest EUR/USD position the margin would allow is about 60,000 dollars, a little over half a standard lot. At 1:500, you could open close to 1 million dollars, about nine standard lots. At that size each pip is worth around 90 dollars, and a 22-pip move against you would wipe out the account.

So leverage is a ceiling, not a target. The danger is not the number itself but the temptation to fill up to it. A useful habit is to look at your effective leverage: the total value of your open positions divided by your account balance. In the worked example, 11,000 ÷ 2,000 gives about 5.5 times, which is far below the 30 times on offer.

If the free margin in your account runs too low, the broker may issue a margin call and then start closing positions automatically, often at the worst possible moment. The tighter your positions relative to your account, the less likely that is.

Size the trade from the stop, not the leverage

The safer way to build a trade runs in the opposite direction to how many beginners start:

  1. Decide how much of your account you are willing to lose if you are wrong, as a percentage.
  2. Find the place on the chart where your idea is clearly wrong, and set your stop there.
  3. Divide the money at risk by the number of pips to the stop, then by the pip value per lot. That gives your lot size.

With a 2,000-dollar account, 1% risk and a 25-pip stop, you can afford 20 dollars ÷ 25 pips = 0.80 dollars per pip, which is 0.08 lots of EUR/USD. The position size calculator does this for you in a few seconds. Leverage only enters the picture at the end, as a check that you have enough margin to open the trade.

In practice

  • Know whether your pair counts pips at the fourth decimal or, for yen pairs, the second.
  • Know the pip value of your lot size in your account currency before you place the trade.
  • Set the stop first, then work out the lot size from the amount you are prepared to lose.
  • Treat maximum leverage as a ceiling, and keep an eye on your effective leverage across all open trades.
  • Remember that spreads, commissions and overnight swaps come on top of the pip maths; see the glossary for any term that is unclear.

Forex trading with leverage carries a high risk of losing money. None of this is a recommendation to trade; it is a way to understand exactly what is at stake before you do.

Risk warning: Trading foreign exchange and CFDs on margin carries a high level of risk and may not be suitable for all investors. Leverage can work against you. Content on FXROLL is for information and education only and is not investment advice. Prices and data may be delayed or contain errors.

Keep reading

More blog →