BREAKINGUSDJPY and XAUUSD react as US carrier arrives in Middle East amid Iran tensions
Level 6 · Lesson 3 of 7

Position sizing: the right lot size every time

3 min readRisk and mindsetFree
In this lesson
  • Position size comes from three things: money at risk, stop distance and pip value.
  • Lots = money at risk ÷ stop in pips ÷ pip value per lot.
  • A wider stop means a smaller position, so the risk in money stays the same.

You know how much you want to risk. You know where your stop-loss goes. Position sizing joins the two, so a stopped-out trade loses exactly what you planned, no more.

The formula

Lots = money at risk ÷ stop distance in pips ÷ pip value per standard lot

Position size in three steps
$10,000 × 1%money at risk = $100÷50 pipsstop-loss distance÷$10pip value of 1 lot=0.20 lotsyour position size

Example: $10,000 account, 1% risk, 50-pip stop, EUR/USD in a US dollar account ($10 per pip on 1 lot).

Worked example

  • Account: $10,000. Risk: 1% → money at risk = $100.
  • You buy EUR/USD with a stop 50 pips away.
  • Pip value of 1 standard lot of EUR/USD in a dollar account: $10.
  • Lots = $100 ÷ 50 ÷ $10 = 0.20 lots.

If the stop is hit: 50 pips × $10 × 0.20 = $100. Exactly your planned 1%.

Same risk, different stop

Now say the chart tells you the stop should be 25 pips away instead:

  • Lots = $100 ÷ 25 ÷ $10 = 0.40 lots.

And if the stop needs to be 100 pips away:

  • Lots = $100 ÷ 100 ÷ $10 = 0.10 lots.

The money at risk is the same each time. The stop decides the size, not the other way round.

Pairs where the pip value is not $10

For pairs like USD/JPY or EUR/GBP, the pip value per lot depends on exchange rates, so it changes a little every day. Use the calculator below, which uses today's rates and your account currency.

Rounding

Platforms usually accept sizes to two decimals (0.01 lots). If the formula gives 0.236, round down to 0.23, so you never risk more than planned.

Try it yourselfPosition Size CalculatorFull page →
Position size
0.4 lots
Units40,000
Money at risk$100.00
Pip value at this size$4.00
Mini / micro lots4 / 40

Round down to your broker's minimum lot step (often 0.01). Never risk money you can't afford to lose.

Quick check

You have $2,000, risk 1% and your stop is 20 pips on EUR/USD (USD account). What size should you trade?

In short

Risk money ÷ stop pips ÷ pip value = lots. Stop first, size second, and round down. Do this on every single trade.

Want to go deeper?How to calculate position size in forex: the lot size for every tradeRead →Pips, lots and leverage explained with one tradeRead →
Your progress is saved on this device only. No sign-up needed.

For education only, not financial advice. Example prices are made up to explain the idea. Trading with leverage is high risk and you can lose money quickly.